Powerstar 2024 MPPT Solar Regulator

Powerstar 2024 MPPT Solar Regulator

Morningstar 4.5A Solar Regulator

Morningstar 4.5A Solar Regulator

Blue Sky Energy SB50DL MPPT Regulator

AUD$715.00

Availability: Out of stock
SKU
SB50DL

Blue Sky Energy Inc Logo

Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost SB50DL to increase charge current up to 30% or more compared to conventional charge controllers. 

Solar Boost SB50DL provides an advanced fully automatic 3-stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less maintenance. An automatic or manual equalize function is also provided to periodically condition Flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energys advanced IPN network interface are
also included.

The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control.

Blue Sky Energys advanced Integrated PowerNet, or IPN Network, allows up to 8 IPN capable charge controllers to
communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate.

Features

Patented MPPT technology increases charge current by up to 30% or more!

50 amp 12/24 volt rating supports a wide range of applications.

Auxiliary output serves as 20 Amp load controller or 2 Amp battery charger.

LCD digital display monitors PV charge performance.

IPN network interface coordinates multiple controllers & shares optional battery temperature sensor & display.

Optional IPN-ProRemote display provides complete charge control & battery system monitoring, eliminating the need for a separate battery monitor device.

3-Stage charge control with filtered PWM output & auto/manual equalization improves battery performance & life.

MPPT power converter can charge 12 volt batteries from 24 volt PV modules.

Durable powder coat finish & conformal coated electronics resist corrosion.

Available temperature compensation further improves battery performance & life.

Fully protected against excess current, temperature, transient voltage & polarity.

Load Controller Provides Fully Adjustable Dusk To Dawn Lighting Control

Full 24 month limited warranty

 

SPECIFICATION
 
   
Nominal System Voltage 50 Amp Maximum
   
PV Open Circuit Voltage 12 / 24VDC Field Selectable
   
Standby Power Consumption  57VDC Maximum (Recommend maximum Voc at STC ≤ 45.6VDC)*
   
Charge On Power Consumption 30mA Typical 
   
Charge Algorithm  3 stage charge. Acceptance/Float transition based on charge current matched to battery amp-hours
   
Acceptance Voltage Setpoint   13–16VDC / 26–32VDC
   
Float Voltage Setpoint  0–2VDC / 0–4VDC < Acceptance
   
Equalization Voltage Acceptance + 1.0 / 2.0VDC 
   
Voltage step-down Can charge 12V battery from 24V Array
   
Temperature Compensation Optional temperature sensor adjusts charge voltage setpoint based on measured battery temperature.
   
Power Conversion Efficiency 97% @ 40 Amp Output
   
Cabinet Dimensions 10"H x 83/4"W x 31/2"D (25.5cm x 22.6cm x 8.74cm)
   
Digital Display  Available in the unit, as a remote, or both.
   
Digital Display Range/Accuracy Voltmeter,   70.0VDC / ±0.30% F.S
   
Specified Temperature Range 0 to +40ºC  (Extended range –40 to +60ºC
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account